Sealing powders & Pasta

EasyFiller 45 is a breathable, mineral grout for drywall. The product was specially developed for finishing work where a reduced application time is desired (approximately 45 min). EasyFiller 45 is ideal for filling joints and repairing damage.

Grouting material for finishing already filled drywall joints and for spackling the board surface.

Knauf Uniflott is a powdered material based on a special gypsum base, refined with plastics and tuned by special additives. Knauf Uniflott Impregnated has a retardant water absorption effect for application on impregnated boards - content: 25 kg

Knauf Uniflott is a powdered material based on a special gypsum base, refined with plastics and tuned by special additives. Knauf Uniflott Impregnated has a retardant water absorption effect for application on impregnated boards - content: 5 kg

PUTZUNA® PL is a ready-to-use cement-based plaster with high water resistance, suitable for interior and exterior use. Made of cement, selected quartz sands and high-quality aggregates. Easy to prepare with water, it delivers a waterproof plaster with high final resistance.

PUTZUNA® BA-W is a ready-to-use lime/cement-based plaster suitable for interior and exterior use. It contains cement, lime, selected quartz sands and high-quality aggregates. This plaster offers excellent adhesion and is ideal for renovations and new construction projects.

Final coat plaster for plastering in two layers in combination with the base plaster Knauf MP75. Knauf Fix & Finish is flexible and resistant, has high adhesion capacity and is easy to apply. Manual processing. - Content: 25 kg

Paste for covering joints already finished with Knauf Jointfiller Plus or Uniflott, also for spackling the board surface - content: 20 kg

Paste for covering joints already finished with Knauf Jointfiller Plus or Uniflott, also for spackling the slab surface. - content: 5 kg

Creamy, easy-to-use and shrinkage-resistant paste suitable for both filling and finishing joints between drywall. Also suitable for filling seams and finishing corners.

For filling the joints of gypsum boards with AK longitudinal edges in finishing grades F1 and F2a and for finishing the joints of gypsum boards with HRAK edges. Furthermore, also for smoothing numerous substrates.

For finishing joints (F2a) and for filling entire surfaces (F2b and F3). SuperFinish can be applied indoors on the following substrates: drywall, gypsum fiber boards, concrete/cellular concrete, plasters, Masonry from flat, bonded blocks.

Flexible and light paste for repairs and for filling cracks, fissures and joints. Suitable for walls and ceilings with plaster, from slabs or from plaster blocks. This paste does not shrink and is repaintable after 2h.

Light, ready-to-use painter's putty or spray putty intended as a scraper coat or for smoothing for the application of paints and bonded coverings. ROLL & SPRAY is ready to be processed with an airless system or with a roller.

Joint paste for hydro drywall. Knauf's ready-to-use Hydro Pasta is ideal for filling and finishing the joints of water-resistant drywall in wet areas.

Knauf filler pasta is een smeuïge, makkelijk te gebruiken en krimparme pasta die geschikt is voor zowel het vullen als het afwerken van voegen tussen gipsplaten. Eventueel daarna afwerken met Knauf filler 2 finish F2F.
Verbruik : ca. 0,35 kg / m²

De Aquapanel® Voegenlijm (PU) wordt gebruikt voor de onderlinge verbinding van Aquapanel® Indoor platen op wand- en voorzetwandsystemen. Aquapanel® Voegenlijm (PU) is een laag-visceuze, enigszins opschuimende en vullende polyurethaanlijm. Verbruik: ca. 50 ml / m²

Synthetic dispersion for highly or irregularly absorbent substrates, intended to prevent burning of the gypsum plaster - contents: 15 kg

PUTZUNA HY is used for waterproofing basements, water tanks, monitoring wells, swimming pools, foundation walls, showers, ... and for levelling vertical surfaces (masonry, concrete structures) - content: 25 kg - product: cement-based waterproof plaster

MiXem BASIC is a mineral and ready-mixed mortar, based on lime/cement and hydrophobic agents, for use as a base and final coat plaster on interior and exterior masonry work. MiXem BASIC is always used in combination with a bonding mortar.

MiXem SUB is a mineral, ready-mixed cement-based mortar with hydrophobic agents. Suitable as a base and final coat plaster indoors and outdoors, and for sanded finishes. Contents: 25 kg, 48 bags per pallet.

MiXem LIGHT is a light, ready-mixed lime/cement-based mortar with EPS beads. Suitable as a basic plaster on light interior and exterior masonry (density > 500 kg/m³) and as a tile substrate. Contents: 25 kg, 48 bags per pallet.

Meet the Knauf MP75 Machine Plaster, a high-quality product designed to meet all your plastering needs. Consumption: 3.5m²/sack

Ideal for V-joints in drywall, concrete, and filling holes and slots
Layer thickness is unlimited.

Ardex R1 is a renovation plaster/wall leveling with fast drying due to the ARDURAPID® effect. White cement-based levelling mortar. For leveling and plastering walls and ceilings in renovation and new construction.

Sikalastic 260 aqua stop is a liquid waterproofing membrane. Ready to use, applied phase in liquid form, for wet areas.

Webersys package is an all-in-one package for sealing wet areas. The sealing package includes webersys coat and a webersys tape for complete protection against moisture damage under tiles.

The Ardex R4 rapid rapid plaster is ideal for quick repair work - without additional priming. ARDEX R4 RAPID is unique.

Schluter KERDI Coll is a 2-component adhesive for waterproof sealing of overlaps (KERDI Band) at seams. Content 1.85kg. Consumption depends on the application. Please read the technical data sheet.

Sika® Quick Cement is a ready-to-use fine mortar with fast curing for pre-sealing leaks and for fixing components.

Sika® Snelcement is een kant-en-klare fijne mortel met snelle uitharding voor het vooraf dichten van lekkages en voor fixeren van onderdelen.

For the preparation of soiled substrates, weak and non-absorbent substrates isolates soot, nicotine, (dry) water stains and yellowing processing by brush or roller. Consumption 0.25 kg/m².

Adhesive bridge for plastering substrates with low absorption capacity. Recommended for concrete with smooth formwork. Processing by machine or using a lambskin roller - content: 5 kg

Knauf betokontakt adhesive bridge for plastering substrates with low absorption capacity. Recommended for concrete with smooth formwork. Application is by machine or using a lambskin roller.

ARDEX LS is a bonded lightweight infill floor for use in the ARDEX STRONGLITE® lightweight screed system.

ARDEX G 10 is a cementitious premium grouting mortar with special fillers and additives for fine grouting surfaces, optimum processing quality, constant colors independent of the water absorption of the tile material used, and a long sponge-off time.

ARDEX G 10 is a cementitious premium grouting mortar with special fillers and additives for fine grouting surfaces, optimum processing quality, constant colors independent of the water absorption of the tile material used, and a long sponge-off time.

ARDEX G 10 is a cementitious premium grouting mortar with special fillers and additives for fine grouting surfaces, optimum processing quality, constant colors independent of the water absorption of the tile material used, and a long sponge-off time.

ARDEX G 10 is a cementitious premium grouting mortar with special fillers and additives for fine grouting surfaces, optimum processing quality, constant colors independent of the water absorption of the tile material used, and a long sponge-off time.

ARDEX G 10 is a cementitious premium grouting mortar with special fillers and additives for fine grouting surfaces, optimum processing quality, constant colors independent of the water absorption of the tile material used, and a long sponge-off time.

ARDEX G 10 is a cementitious premium grouting mortar with special fillers and additives for fine grouting surfaces, optimum processing quality, constant colors independent of the water absorption of the tile material used, and a long sponge-off time.

Special fine-grained grout for elastic, tension-reduced joints in large-format coverings and solid bonding applications Content: 310 ml Color: Anthracite matt consumption: 12.5 running meters per tube with a joint thickness of 5 x 5 mm (25 mm²)

Large format tiles for outdoors are very popular. But the technical implementation is not so simple. Because there are relatively few joints, stresses due to temperature and weather changes cannot be dissipated as easily.

Quick-curing flex-joint mortar. For joint widths of 2-15mm, walls and floors, indoors and outdoors. In addition to full ceramic tiles, this grout can be used to grout grease tiles, glazed tiles, moisture-insensitive natural stone and concrete tiles, glass, porcelain and ceramic mosaics.

The Ardex G9 S Flex is a highly loadable and fast-curing flex joint mortar. For joint widths of 2-15 mm, walls and floors, indoors and outdoors.

PREMIUM flex grout with particularly high color stability. For joint widths of 1 - 10 mm, walls and floors, indoors. Suitable for all ceramic tiles, glass mosaic, glass tiles and natural stone.

ARDEX G 10 PREMIUM FLEX-JOINT MORTAR Cementitious jointing mortar For grouting ceramic tiles, glass mosaic, glass tiles and natural stone Increased color stability For joint widths of 1 - 10 mm Good edge retention Easy to grout with a long sponge-off time Does not burn

ARDEX G 10 PREMIUM FLEX-JOINT MORTAR Cementitious jointing mortar For grouting ceramic tiles, glass mosaic, glass tiles and natural stone Increased color stability For joint widths of 1 - 10 mm Good edge retention Easy to grout with a long sponge-off time Does not burn

ARDEX G 10 PREMIUM FLEX-JOINT MORTAR Cementitious jointing mortar For grouting ceramic tiles, glass mosaic, glass tiles and natural stone Increased color stability For joint widths of 1 - 10 mm Good edge retention Easy to grout with a long sponge-off time Does not burn

ARDEX G 10 PREMIUM FLEX-JOINT MORTAR Cementitious jointing mortar For grouting ceramic tiles, glass mosaic, glass tiles and natural stone Increased color stability For joint widths of 1 - 10 mm Good edge retention Easy to grout with a long sponge-off time Does not burn